Master Detector

webmail.tradeindia.com

1 = Display for information of code. inquiry of information, error messages
2 = green LED: system ok
3 = red LED: alarrn
4 = yellow LED: error
5 = green LED: Sensor ok / red LED: Sensor mistake
6 = triggered thresholds, if an alarm f threshold (1-8) shows by LED then can delete by push the reset button (8)!
7 = adjusted threshold value
8 = reset button
9 = esc Escape = EXIT
10 = Enter-key
Note: At all equipment types with a display and a keyboard is in the front lid of Master or TABD

Specifications & Features:

Earliest possible earthquake onsite early warning through use of state of art electronic sensors (triaxial) and analytical methods.
Measuring head: 3 x 2 axis sensors- every axis is supervised by two sensors elements all the  time
Operating Range: Dc-40Hz
Sensitivity: 1V/g ±4%
non linearity: < 2,5%
Cross Sensitivity: < 3%
Noise: ~0.01m/s2
Measurement Range: ± 1,7g
Frequency: 50-60 HZ
Battery Weight: 0.6kg
Battery Backup: 6-8 hrs
Complete weight: 2.5kg

  • The axis inaccuracy of the sensor is < approximate 3o
  • Successfully scientifically supported and tested
  • Communication between all system element via data – CAT7
  • Independent battery emergency power supply of the system at blackout
  • Production according to highest quality standards DIN EN ISO 9001: 2008

Equipment fulfills the following norms and guidelines

  • Electromagnetic compatibility
  • Unloading of static electricity
  • Interference resistant of high frequency fields
  • Burst interference resistant
  • Limiting values for radio interference
  • Low voltage recommendation
  • Generic standard resistant (industry area)
  • Generic standard disturbing emission (living area)
  • Interference resistant against induced fields on power and data lines
  • Gas automatic shut off systems- reacting to seismic moments